Datasheet

44 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Installation and Setup
Installing the Printer Driver
2.6.2 Installing the Ethernet Printer Driver
Step 1. Connect the printer power (see Section 2.4), and connect the Ethernet Port on the rear
of the printer to an Ethernet Network Port (see Section 2.5). Turn the Printer on, and
let it initialize until the READY LED on the front panel is lit.
Step 2. Insert the User Documentation, Drivers, and Training CD into the CD drive of the
host computer. The Select Language window will open.
Step 3. From the Select Language window, click on the appropriate language for
your system.
Note • To install the USB driver, see Section 2.6.1.
Important • The Ethernet Network must be configured correctly, with the Printer and the
host computer on the same subnet mask. If you are not sure how to verify this or change the
configuration, consult someone knowledgeable on Ethernet Networks.
Important • A valid static IP address must be assigned to the printer.
Important • See Section 4.9 for system-related troubleshooting issues.