Datasheet

32 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Installation and Setup
Connecting Power
2.4 Connecting Power
The AC Power is connected and turned on so that in the next procedure, Ribbon Installation,
when the printer’s main cover is opened the Print Head will raise automatically.
Step 1. Verify that the printer’s Power Switch is set to OFF (O).
Step 2. Select the proper power cord for the local ac power source from the accessories that
are shipped with the printer.
Step 3. Plug the power cord into the printer’s power connection and a grounded AC power
source connection.
Step 4. Turn the printer on by setting the Power Switch to ON (I).
Power Switch
Caution • If you do not have the proper power cord for your local power source, or if the
power cord appears frayed or damaged in any way, or if the power cord will not securely
plug into the printer’s power connection or the source outlet, STOP! Use of a damaged
or incorrect power cord could cause equipment damage, result in an electrical fire, or
possibly cause injury.