Datasheet

Installation and Setup
Setting up the Printer
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 27
Step 2. For 1.3 in (33 mm) laminate for use with magnetic stripe cards, snap the Laminate
Edge Guide into the inner hole-and-slot in the lower cassette, as shown in the
following pictures. For 1.66 in (42 mm) laminate for use with signature-stripe cards,
use the outer hole-and-slot.
Inner Hole-
and-Slot
Outer Hole-
and-Slot
Laminate Edge
Guide in Inner
Hole-and-Slot for
1.33 in (33 mm)
Laminate Used
With Magnetic
Stripe Cards
1.33 in (33 mm)
Laminate for
Magnetic Stripe
Cards