Datasheet

22 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A

Installation and Setup

Setting up the Printer

Step 2. If there is a suspicion a patch is blocked somewhere, temporarily remove the

corresponding Transfer Guide to be sure there are no scraps of laminate remaining. If

there are any, remove them. Then slide the Transfer Guide back in until it is held in

place by the Retaining Spring.

Step 3. Open the Cassette, like a clam shell, by separating its two halves. Grasp the two

halves firmly with your fingers, then pull it apart. Do NOT use tools. (Upper

Cassette shown.)

Step 4. If there is an empty laminate core in the Cassette, remove it.

1. Push and hold

the Retaining

Springs (A)

to the Left

2. Slide the

Transfer

Guides (B)

Straight Out

3. Release the

Retaining

Springs (A)

(A)

(B)