Datasheet

Installation and Setup
Setting up the Printer
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 19
2.3.3 Installing the Cleaning Cassette
Before being printed, each surface of the card is cleaned by a soft tacky roller that is itself
cleaned periodically by adhesive tape in the Cleaning Cassette. By default, the roller is cleaned
every 10 cards. The printer driver software allows the card count to be modified.
By cleaning the roller every 10 cards, the Cleaning Cassette contains sufficient tape
for 3,000 cards.
Step 1. Open the main cover of the printer.
Step 2. If present, remove the used Cleaning Cassette.
Step 3. Remove the Cleaning Cassette from its packaging.
Step 4. Remove the protective foil from the Cleaning Cassette. Avoid touching the exposed
tacky surface.
Step 5. Install the Cleaning Cassette on the printer by locating the rectangular pin on the
cleaning mechanism in the receptacle on the cassette. Push the cassette gently home,
ensuring that the internal grooves on the upper spool engage the teeth on the take-up
drive; you will hear a click when it is fully engaged. Note that you may need to move
the take up side of the cleaning tape assembly to allow for full engagement.