Datasheet

258 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Magnetic Encoder
Step 5. Turn the printer around (view from back).
Step 6. With a flat-blade screwdriver, disconnect the ground wire attached to the Frame.
Step 7. If not already disconnected, remove the Magnetic Encoder Connector from J14 on
the Main PCBA.
Step 8. Turn the printer around (view from front).
Step 9. Carefully pull the cable and connector through the opening behind the Hopper.
Step 10. Remove the Magnetic Encoder.