Datasheet

254 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Eject Arm
5.26 Eject Arm
Step 1. Locate the Eject Arm.
Step 2. If not already done, remove the Rear Cover (see Section 5.3) and the Main PCBA
(see Section 5.5).
Step 3. If the Contact Smart Card Option is installed, remove the Contact Smart Card
PCBA (see Section 5.25).
Step 4. With a TORX T10- driver, remove the screw holding the Color Sensor in place.