Datasheet

Replacement Procedures
Nip Rollers (Laminator)
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 247
Latch Adjustment
The cassette is held in place by two ears on the cassette latch. Using a piece of 1 mil laminate
as a feeler gauge, set the front ear close to, but not touching, the cassette. A hex head screw
(arrowed) sets front-back position of the latch.
Adjust the latch position using a 7/64" hex wrench.
Latch
Adjust
Latch
Ears