Datasheet

Replacement Procedures
Nip Rollers (Laminator)
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 243
Step 5. With snap-ring pliers, remove the top snap ring that holds the nip roller shaft
in place.
Step 6. With snap-ring pliers, remove the bottom snap ring that holds the nip roller shaft
in place
Step 7. Turn the printer around.
Step 8. With a TORX T10 driver, loosen both motors; i.e., remove two of the three screws
for each motor, and just loosen the third screw.
Step 9. Pivot the motors out of the way to access the Nip Rollers.