Datasheet

Replacement Procedures
Nip Rollers (Laminator)
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 241
5.23 Nip Rollers (Laminator)
5.23.1 Removal
Step 1. If not already done, remove the Rear Cover (see Section 5.3). It is not necessary to
remove the Main PCBA.
Step 2. Locate the Nip Rollers.
Step 3. Remove both Laminate Cassettes.
Step 4. Remove the Laminate Cassette Receivers (top and bottom).
a. Use the 7/64” hex driver to remove both the top and bottom spring loaded cap
screws. Be careful not to lose the screws and springs.