Datasheet

236 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Heater Elements
5.22 Heater Elements
5.22.1 Removal
Step 1. If not already done, remove the Rear Cover (see Section 5.3). It is not necessary to
remove the Main PCBA.
Step 2. Locate the Heater Elements.
Step 3. Disconnect the Heater Elements from the Main PCBA (Remove the top heater from
J42A and J43, and remove the bottom heater from J42B and J44).
Step 4. With a TORX T10 driver, remove the three screws that hold each heater to
the Frame.
Hot Surface • Wait 10 - 20 minutes for the printer to cool down.