Datasheet

Replacement Procedures
Ribbon Payout Spindle
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 225
5.20.3 Adjustment
To perform the procedure ensure you have a Clutch Burn-In Tool Kit, a 7/16” nut driver, and
the IDPrint test and adjustment program.
The Clutch Burn-In Tool Kit, P/N: 105927-430, consists of:
Step 1. Find Low Ribbon Torque.
a. Plug in and power up the printer
b. Ensure the Payout Spindle rotates freely.
c. Ensure that there is very little end-to-end play (detent) in the Take-up Spindle;
adjust the take-up spindle nut as required.
• Clutch Pulley
Assembly
• Grooved Splined
Cores (2)
• O-rings (2)
Take-up Spindle
Payout Spindle