Datasheet

222 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Ribbon Payout Spindle
5.20 Ribbon Payout Spindle
5.20.1 Removal
Step 1. Locate the Ribbon Payout Spindle.
Step 2. Remove the RFID Antenna Cover. Note that the cover snaps in place.
Step 3. With a 7/64 hex driver, loosen the two screws that hold the Ribbon Encoder Sensor
to the Frame.
Step 4. Slide the sensor down to clear the encoder wheel.