Datasheet

Installation and Setup
Unpacking the Printer
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 13
Step 4. Remove the foam block from the top of the shipping carton.
Step 5. Lift the printer from the shipping carton.
Step 6. Remove the protective plastic bag from the printer.
Step 7. Place the printer in a location that meets the following requirements:
• A reasonably dust- and dirt-free environment will give better print quality.
• Flat surface at least 699 mm (27.5 in) x 246 mm (9.7 in) that can support the
weight of the printer; additional space preferred. Vertical clearance at least
450 mm (17.7 in). Clearance between the back panel and any wall at least
100 mm (3.9 in). There should be easy access to all sides of the printer.
• Temperature within the range of 10
° to 35°C (50° to 95°F).
• Relative Humidity 20 to 80%, non-condensing.
• AC power accessible.
Card Weight
Documentation & Driver CD
USB Interface Cable
Caution • The printer weighs approximately 15.9 kg (35 lbs).
Important • Save all the packing material and the shipping carton in case the printer needs to
be moved or shipped. If the original material is lost or damaged, a replacement Shipping Kit
can be ordered from Zebra.