Datasheet

Replacement Procedures
Printhead Assembly
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 195
5.13.2 Replacement
Step 1. Note the resistance (e.g., R=2597) listed on the replacement Printhead Assembly.
Also, change the value on the printhead cover to reflect the new resistance value.
Step 2. Preset the angle adjust screw to approximately 30 mils (the thickness of a card).
Caution • Do not touch the bottom edge of the print head. Grease or other contaminants
from the hands can attract particles that may in time damage the head