Datasheet

Replacement Procedures
Printhead Assembly
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 193
Step 2. With a 5/64” hex driver, remove the front mounting screw (LONG SHOULDER).
Step 3. With a 5/64” hex driver, remove the back mounting screw (
SHORT SHOULDER).
Step 4. With a 3/32” hex driver, remove the two screws holding the Printhead Cover in
place. Note that the ground wire is attached via the longer rear screw.
Step 5. Remove the Printhead Cover.
Step 6. Move the ground wire out of the way.
Back Mounting
Screw
DO NOT LOOSEN or
REMOVE
Front Mounting
Screw