Datasheet

192 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Printhead Assembly
5.13 Printhead Assembly
5.13.1 Removal
Step 1. Locate the Printhead Assembly.
Electrostatic Discharge Caution • The Printhead is extremely susceptible to
Electrostatic Discharge (ESD) damage. Do not touch the bottom surface of the
Printhead. The replacement must be performed at a static-free work station, an anti-
static wrist strap must be worn and properly terminated, or other appropriate protection
must be used.
Important • This procedure describes replacing the Printhead Assembly. The Printhead
Assembly is supplied with components in correct alignment with each other. These
alignments are critical to proper operation of the printer.
Important • Do not deviate from the procedure given here, do not loosen or tighten any
screws except those specifically noted in this procedure, and do not attempt to adjust any part
of the Printhead Assembly.
Note • The Printhead Assembly can be replaced without removing any other parts of
the printer.