Datasheet

184 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Flip Station
Step 27. Position the Cam and Flip Arm. Note that the large side (lobe) of the Cam is on the
same side as the extended Flip Stop.
Step 28. With a Phillips #0 screwdriver, install the screw holding the Cam and Flip Arm
in place.
Step 29. Adjust the Azimuth.
a. Locate the azimuth adjustment screw.
Extended
Flip Stop
Cam Lobe