Datasheet

182 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Flip Station
Step 15. With a flat-blade screwdriver, remove the lower two 5/16 screws that hold the
Backplate to the Frame; refer to figure below.
Step 16. With a Phillips #2 screwdriver, remove the upper two screws holding the Backplate
to the Front Bezel; refer to figure above.
Step 17. Cut the cable ties, as required, to free the Backplate.
Step 18. Remove the Backplate by pulling it out and down from the printer.