Datasheet

Replacement Procedures

Platen

980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 177

5.11 Platen

Step 1. Using the Card Transport Knob, move the Truck back to its home position, stopping

when the right hand edge of the Platen is even with the right hand inner surface of

the Card Input Hopper.

Step 2. Push the Platen to the left against its spring.

Step 3. Pry the Platen out using a CR-80 card.

Step 4. Remove the Platen.

Important • Do not lose the spring! It holds the platen tight against the right of the truck and

is essential for good print registration.

Spring