Datasheet

Replacement Procedures
Main PCBA
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 171
5.5.2.3 Printhead Resistance
Step 8. After changing the Main PCBA, go into the Printer Driver; and enter the
Printhead resistance.
a. Select Start > Printers and Faxes, right click the Zebra Card Printer, and select
Properties from the pop-up menu.
b. From the Card Printer Properties screen, select Device Settings > Printer
Adjustment > Print Station Adjust...
c. In the Printhead Resistance (Ohms) field, enter the resistance of the Printhead.
This number is located on the label applied to each Printhead.
The Printhead resistance is also written on the inspection report shipped with
each printer.