Datasheet

168 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Replacement Procedures
Main PCBA
Step 3. Run Ribbon Motor (Clutch Burn-In)
a. Remove the O-ring in the front slots on the cores.
b. Remove the Clutch and associated O-ring.
c. Reinstall an O-ring in the front slots on the two cores.
d. From the IDPrint screen, select Control > Ribbon Tasks > Run Ribbon Motor
(Clutch Burn-In):
e. Observe the two cores rotate counterclockwise.
O-ring