Datasheet

Troubleshooting
Adjustment Procedures
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 143
4.10.4.2 Pocket Adjustment
Skew and vertical offset are adjusted by screws in the cassette pocket (7/64" hex wrench for
skew, flat blade screwdriver for vertical offset, see diagram below).
Before adjusting for skew or vertical offset, remember that there is significant interaction
between the latch and the adjusting screws in the pocket.
Skew
Adjust
DO NOT
ADJUST
Vertical
Offset
Adjust
Important • Always adjust the latch after adjusting either of the screws in the pocket.