Datasheet

Troubleshooting
Adjustment Procedures
980006-001 Rev. A Zebra P630i & P640i Card Printer Service Manual 133
4.10.2.2 Printhead Position (Height/Pressure) Adjustment
Step 1. Select Start > Printers and Faxes, right click the Zebra Card Printer, and select
Properties from the pop-up menu.
Step 2. From the Card Printer Properties screen, select Device Settings > Printer
Adjustment > Print Station Adjust...
Step 3. In the Printhead Position Adjust field, decrease the value by 10.
Step 4. Print a card.
Step 5. If your printed card still looks good to you, repeat Step 3 and Step 4 until you get an
unacceptable printing. Unacceptable printing would be light printing to the point
that the image is almost not being transferred to the card.
Step 6. Once you have unacceptable printing, add 60 to your Printhead Position Adjust.
This will set your optimal printhead height.