Datasheet

106 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Troubleshooting
Preventive Maintenance
4.4 Preventive Maintenance
There is almost no preventive maintenance to be performed. Dust and debris should be
vacuumed out every 12 months, or more frequently in adverse environments.
Most of the problems described in the following pages are correctable by the user, but please
note there is the potential for unexpected results if the procedures are not followed carefully. If
in doubt, call Zebra Technical Support.
Before calling for technical support, do the following:
• Check all cable connections, including power.
• Check that the power switch is ON.
• Unless you hear noises suggesting a card jam condition, try power cycling: switch OFF,
wait 15 seconds, then switch ON.
• Open the Main Cover, then look for obvious problems; e.g., a card where it should not be,
media outages, mis-feeds (color ribbon, laminate, cleaning cassette. etc.).
Note • In order to see what is happening in the printer during test (e.g., check Flip Station
operation while the Feeder and Main Covers are open), override the interlocks by inserting
tabs into the corresponding interlock slots.