Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 93
Firmware Update
Step 1. Go to start > Printers and Faxes.
Step 2. From the Printers and Faxes list, right click the Card Printer; and select Properties
from the pop-up menu.
Step 3. The Printer Properties window will open. Click on the Device Settings tab.
Step 4. Click on Tools > Properties.
Step 5. This brings up the Tools display.
Important • Before starting the Firmware Update, refer to the Test Card you printed prior to
removing and replacing the Main
PCBA. You will need the Head Resistance, the X and Y
Offsets, and the End of Text value to update the firmware on the replacement Main
PCBA.
If for any reason you were unable to print the Test Card, contact Zebra Technical Support to
obtain the above values.
Type the
command
here ...
... then
click the
Execute
button.
Note • See Appendix D for the complete list of commands