Datasheet

80 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
Step 4. Push the Printhead Assembly in and upward.
Step 5. Lift the Printhead Assembly out of the frame.
Step 6. Disconnect the green ground wire.
Step 7. With a small flat-blade screwdriver, loosen and remove the printhead data and
power cable.
Step 8. Disconnect the 4-wire Color Ribbon Sensor. Do not let the 4-wire connector go into
the access hole -- it is difficult to retrieve. Note that this sensor connects to J5 on the
Main
PCBA.
Step 9. Remove the Printhead Assembly.