Datasheet

74 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
4.3.3 Resetting to Factory Defaults
To reset the Ethernet Adapter configuration parameters to the factory defaults:
Step 1. Turn printer power
OFF (O).
Step 2. Press the Ethernet Reset Button; hold it in while turning the printer power
ON ( | ).
Step 3. Keep the Ethernet Reset Button pressed until the Status Indicator light turns
GREEN.
Step 4. Release the Ethernet Reset Button.
Printing a Configuration Card
To print a configuration card, press and hold the Ethernet Reset Button until a card starts
to print.
Ethernet Reset Button