Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 71
4.3 Troubleshooting the Ethernet Connection and Adapter
4.3.1 Ethernet Adapter Status Indicator
A bi-color Status Indicator displays the operational status of the Ethernet Adapter.
The following conditions might occur:
Step 1. During normal operation, the
LED is solid GREEN for more than 30 seconds. This
indicates all the hardware is functioning properly and the Ethernet Adapter has
detected the presence of the network. It does not mean the Ethernet Adapter has an IP
address or is attached to a printer queue.
Step 2. If the
LED is rapidly flashing GREEN (9 times/sec), the Ethernet Adapter has not
detected the presence of a network cable. To solve the problem:
• Verify that the network cable is appropriate and has an RJ-45 connector.
• Turn the printer power
OFF (O). Remove the network cable from the Ethernet
Adapter. Plug the network cable back in until you hear a positive click. Check the
other end of the cable in the same manner. Turn the printer power on; if the
Ethernet Adapter still does not detect a cable, continue.
• Connect the Ethernet Adapter to a known good network. If the Adapter is still
unable to detect the network cable, contact Technical Support for assistance.
Ethernet Adapter Status Indicator
Important • Cables with a rating higher than CAT-6 have not been tested.