Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 55
The following figure shows how the ribbon and card move relative to each other during the
printing process. (This obviously does not apply to the P110m Printer.)
Note that before printing the “second” K Resin black panel, the card would be moved back to
the card flipper, flipped over, and then advanced to the Printhead.
Printhead at
Fixed Position
1. Ribbon Moves Yellow
Panel into Position at
Printhead
2. Card is Fed to Printing
Position Under the
Printhead
3. Card and Ribbon Move Together
as Yellow Panel is Printed
4. Card and Ribbon Stop at
End of Yellow Panel
5. Ribbon is Stationary; Card is
Moved Back to Printing Position
6. Card and Ribbon Move Together
as Magenta Panel is Printed