Datasheet

48 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A

2.11 Printer Operation

Printing with the printer requires the Windows printer driver, your card design/issuing

software, or printer command-level programming through the printer interface.

The printer can be used with any Windows 2000 or Windows XP software application

program, using the drivers provided on CD with the printer.

Creating a Sample Card

Before you begin a new printing session, print a sample card to ensure that the cards will be

printed correctly. Follow the steps below to print your first card using the True Colours

Card

Printer Ribbon Cartridge and the Windows printer driver.

Step 1. Go to the Microsoft Word software.

Step 2. Go to File > Print.

Step 3. Choose the Zebra Card Printer from the printer names list.

Step 4. Press Close to exit the Print dialogue box.

Step 5. Go to File > Page Setup.

Step 6. Select the Paper tab; and under Paper Size, choose Card.

Step 7. Select the Margins tab; and set all the margins to 0 (zero). Under Orientation, select

Landscape or Portrait.

Step 8. Press OK to exit the Page Setup window.

Step 9. The card appears on the window.

Step 10. Design a card with both black and colored text and with colored pictures similar to

the sample card shown below. (The P110m Printer uses monochrome ribbons only.)

Note • To simplify creating a sample card, you can use one of the sample files that were

installed during the driver installation process. These samples (Word files) can be found in

Start > All Programs > Zebra Card Printers.

http://www.zebracard.com