Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 47
2.10 Printing a Test Card
With ribbon cartridge and cards loaded, your printer is ready to print. To check the operation of
the printer, you should print a test card.
Step 1. Place the printer power switch in the OFF (O) position.
Step 2. While holding down the Multi-Function Control Button, place the printer power
switch in the ON ( | ) position. The LCD status window will glow blue.
Step 3. Keep pressing the Multi-Function Control Button until the SELF TEST message
appears in the window.
Step 4. Release the Multi-Function Control Button, and a test card will print after a few
seconds.
P120i
Serial Nr: 060376
Firmware: V1.50
Head resistance: 1568
Offset: X002 - Y015
EC: 0014
Printing Counter: 00002716
Multi-Function
Control Button
Power
Switch