Datasheet

36 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
Tools
Dialog box for testing and communicating with the printer.
Command to send to printer - Enter a printer command (without leading escape
character) in the top edit box, and click on the Execute button to send to the printer
directly. The Printer Status will show the status of the printer.
Refer to Appendix D, Software, for a complete list of the printer commands.
Test Card - Three test cards are available: Standard, Printer Parameters, and Encoder
Parameters.
Clean - Click on the Printer Only button to clean the printer. Remove all consumables
before executing a cleaning cycle.
Offset Setting - Enter the X and Y direction offset, and click on the Set Offset button to
set the X and Y offsets for printing image.
Direct Encoding - Select the track, and enter the data to encode on the magnetic stripe.
The Encode button feeds a card from the feeder and encodes the data. To read magnetic
data, select the tracks to be read, select Read. To eject the card from the printer, select
Eject Card.
Send File - This command will allow a .prn or .txt file to print.
• The .prn file must be created with a Zebra printer driver using the same ribbon as
present in the printer.
• The .txt file must contain firmware commands only with only one command per line.
The first line must only contain “MASTER”.
• The last line must only contain “SLAVE”.