Datasheet

28 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
Print on both sides - Selection for single-sided or dual-sided printing.
Front and Back - Feature selection for dual sided printing.
Choices based on ribbon type:
YMCKOK
• YMCKO on Front, K on Back
• YMCKO on Front, YMCKO on Back
YMCKO
• YMCKO on Front, YMCKO on Back
• YMCO on Front, K on Back
Monochrome Conversion - Specifies the method of monochrome conversion used in
printing. Different selections have different effects on the way the image is printed. The
options are Diffusion, Halftone regular, and Barcode.
Black Panel - Defines how black panel is applied in a card design.
4 selections:
• Do Not Use - K panel not used
• Use Always - all black pixels will go to K panel
• Text Only - only black text goes to K panel
• Except in Color Picture - all black pixels except bitmap goes to K panel
Black Bitmap - Applies black bitmap option.
Front Overlay Varnish - Feature selection for applying overlay varnish ribbon to front of
card. Default setting is full edge-to-edge varnish.
There are various varnish options. A preview pane is shown for each selection.
• Full overlay varnish - Applies an edge-to-edge overlay
• No overlay - Does not apply any overlay
• Selected Area - Applies overlay only in the area selected by user
• Selected area blank - Applies overlay only outside the area selected by user
• Bitmap based overlay - Applies a user-defined bitmap in the overlay panel
• Smartcard ISO - Does not apply overlay in the area of the ISO standard Smart Card
contacts
• Smart Card AFNOR - Does not apply overlay in the area of the AFNOR standard
Smart Card contacts
• Magnetic Stripe - Does not apply overlay in the area of the ISO standard
Magnetic Stripe