Datasheet

172 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
Software Commands
Complete information about each command, including description, syntax, and parameters, is
presented in the EPCL Programmer’s Guide, Zebra document 980415-001, which can be
downloaded from the Zebra Card Printer Solutions website at http://www.zebracard.com.
The following listing includes the software commands that apply to the P110i, P110m, and
P120i Printers:
!A Stop Motor
A Standard Test Card
A 1 Printer Test Card
A 2 Magnetic Encoder Test Card
ATM Set Card Feeding Mode
&B Load Magnetic Encoder Track Write Buffer
+BS Set Black Synchro
B/vB Write Bar Code
BLACK Print Black Card
&C Set Coercivity
+C Adjusts Monochrome Intensity
+$C Adjust Color Contrast
!CC Get Number of Cards Printed
%CDER Get Magnetic Encoder Read Settings
&CDER Set Magnetic Encoder Track Read Encode Parameters
&CDEW Set Magnetic Encoder Track Write Encode Parameters
+CDOTS Image Print Quality Compensation Factor
+CH Adjust Hologram Intensity
CHECK Return Checksum
CLEAN Set Cleaning Card Sequence
CLN Check Due-for-Cleaning Parameters
CLNCARD Set Cleaning Parameters
+CLCD Set LCD Contrast
+CV Adjust Clear Varnish Intensity
C/vC Write Box (Monochrome)
!D Move Print Head Down
D/vD Draw Diagonal Line (Monochrome/Overlay)
E Retransmit Last Response
&E Write Single Track