Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 141
5.33 Mag Encoder Assembly (Head and Sensor)
Step 1. Locate the Mag Encoder Assembly (Head and Sensor).
Step 2. With a TORX T10 driver, remove the two screws holding the Mag Encoder
assembly to the frame.
Step 3. If not already done, disconnect the Mag Encoder Head and Sensor plug from
connector J23 on the Main
PCBA.
Step 4. Remove the Mag Encoder Assembly.
Step 5. With a TORX T8 driver, remove the screw holding the Sensor to the Bracket.
Note • This procedure is for those printers that include the Magnetic Encoder option.
Mounting
Screws
Mounting
Screw