Datasheet

136 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
Step 6. Using a TORX T10 driver, remove the screw holding the gear (#3) in place.
Step 7. Remove the associated gear.
Step 8. Remove the Rocker Assembly. If you need detailed instructions for the removal of
the Rocker Assembly, refer to Section 5.27, Step 2.
Step 9. Using a TORX T8 driver, remove the four screws holding the motor to the frame.
Note that the orange arrows point out the four mounting screws.
Step 10. Remove the Pressure Roller Lift Motor.