Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 123
Step 5. With a TORX T10 driver, remove the screw holding the plastic retaining plate to the
frame. The retaining plate holds the Platen Roller and Exit Roller in place.
Step 6. In addition to the mounting screw removed in the previous step, two clips hold the
plastic retaining plate to the frame. Use a flat-blade screwdriver to loosen the clips
inside the printer (shown in the next two figures); then remove the retaining plate.
Mounting Screw
Clip 1