Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 105
5.20 Encoder Wheel
Step 1. Locate the Encoder Wheel.
Step 2. Compress the clutch spring by pressing the washer inward, then use fine-point
pliers, a small flat-blade screwdriver, or a pair of fine-point retaining-ring pliers
to remove the retainer clip, then slip the washer and the clutch spring off the
clutch shaft.
Step 3. Slip the gear wheel, felt washer, Encoder Wheel, and second felt washer off the
clutch shaft.
Encoder Wheel