Datasheet

980584-001 Rev. A Zebra P110i / P110m / P120i Card Printers Service Manual 97
5.14 Feed Cover Sensor
Step 1. Locate the Feed Cover Sensor.
Step 2. With a TORX T8 driver, remove the screw that holds the sensor in place.
Step 3. Cut the cable ties holding the various wires and connectors going to the
Main
PCBA.
Step 4. Disconnect the 4-wire sensor plug from connector J8 on the Main
PCBA.
Step 5. Remove the Feed Cover Sensor.
Feed Cover Sensor
Mounting Screw