Datasheet

96 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
5.13 Printhead Fan
Step 1. Locate the Printhead Fan.
Step 2. With a TORX T10 driver, remove the two screws that hold the fan in place.
Step 3. Cut the cable ties holding the various wires and connectors going to the
Main
PCBA.
Step 4. Disconnect the 2-wire Printhead Fan plug from connector J25 on the Main
PCBA.
Step 5. Remove the Printhead Fan.
Printhead Fan
Mounting Screws
Cable Tie