Datasheet

94 Zebra P110i / P110m / P120i Card Printers Service Manual 980584-001 Rev. A
Step 6. From the information on the Test Card, update the printer’s firmware.
a. In the “Command to send to printer” field, type the Print Head Resistance (!R)
command, a space, and the resistance of the Printhead. From the Test Card
shown above, the complete command is !R 1568.
b. Click the Execute button.
c. In the “Command to send to printer” field, type the End of Print (+EC)
command, a space, and the end-of-print value. From the Test Card shown above,
the complete command is +EC 10.
d. Click the Execute button.
e. In the Offset setting section, enter the X and Y offsets for the card front in the
Front X and Front Y fields respectively. From the Test Card shown above, Front
X = 07 and Front Y = 32.
f. In the Offset setting section, enter the X and Y offsets for the card back in the
Back X and Back Y fields respectively. From the Test Card shown above,
Back X = 05 and Back Y = 04.
g. Click the Set Offsets button.
Step 7. The Firmware Update is complete.
P120i
Serial N°: P120i-060376
Firmware: V1.10.16 USB
Head resistance: 1568
Offset X:07/05 Y:32/04
EC: 10
Print counter: 00002716