User guide

31
Getting Started
Defaulting the 10/100 Internal PS
11/12/2009 10/100 Internal Print Server User Guide 14197L-005
Defaulting the 10/100 Internal PS Using WebView
To default the 10/100 Internal PS to factory settings using WebView, complete
these steps:
1. From the ZebraNet PrintServer view, click Factory Print Server Settings.
The Restore to Factory Defaults page opens:
Figure 6 • Restore to Factory Defaults
Important • During the reset cycle, the web pages are unavailable. Upon completion,
check the IP address of the 10/100 Internal PS as it may have changed during the reset
cycl
e.
2. Enable the check box for the settings you want to reset, and click Submit Changes.