Technical information
46 ZebraNet 10/100 Print Server User and Reference Guide
Getting Started
Defaulting the 10/100 PS
The Reset Print Server dialog opens:
3 Select the settings you want to reset, then click Restore.
7HVW%XWWRQ
7RGHIDXOWWKH10⁄100 PSWRIDFWRU\VHWWLQJVXVLQJWKH7HVW
EXWWRQFRPSOHWHWKHVHVWHSV
1 The printer is turned off (O).
The Test button is a small hole on the 10⁄100 PS device. To press the Test button,
you need to insert something small into the hole, like a paperclip.
2 With the printer turned off, press and hold the Test button on the 10⁄100 PS
device and turn on the printer.
3 The status indicator tells you when 10⁄100 PS has been reset to factory defaults,
as follows:
• If an active network cable is connected to the 10⁄100 PS, the status indicator
turns solid green. When this happens, you can release the Test button.
• If there is not an active network cable connected to the 10⁄100 PS, the status
indicator flashes green. When this happens, you can release the Test button.
• For more details on status indicators, see 10/100 PS Status Indicator on page
124.