Technical information

38 ZebraNet 10/100 Print Server User and Reference Guide
Getting Started
Setting up a ZebraNet Connect IP
6 Click OK.
The Add ZebraNet Connect Port screen opens. There is a list of all 10⁄100 PS devices
discovered on the network.
• The TCP/IP monitor searches only the local subnet.
7 If the port you want to add is listed in the Ports Available on Local Subnet window,
select the port name. If the port you want to use is not listed, you can:
• Select Cancel and repeat step 5 to rediscover the 10⁄100 PS devices.
• In ZebraNet Connect IP, click the Locate Non-local Device button and enter
the static TCP/IP address used for the 10⁄100 PS.
8 Click Add.
9 To save the configuration, click OK.
Now you can use ZebraNet Connect IP. Whenever you print to the Windows printer
configured with ZebraNet Connect IP, your print job will go directly to the 10⁄100 PS
port.
Note • If ZebraNet Connect IP is not listed, verify that the software has been
properly installed.