Technical information
Getting Started
Setting Alerts
ZebraNet 10/100 Print Server User and Reference Guide 29
7 Click Add Alert Message.
To receive email alert you must give 10⁄100 PS the IP address of your mail server
that is running SMTP.
8 To save current settings, click Save Printer Setting
.
9 Enter the password and click Save Current Configuration.
10 You can continue to add more Alerts, if finished:
• From the Printer Home Page, select PrintServer Settings>Network
Communications Setup
.
• Click SMTP Email Alerts.
• Specify your SMTP server address.
When these steps are done, you can begin receiving email notification messages.
7RPRQLWRUDOHUWVFRPSOHWHWKHVHVWHSV
1 From the task bar, select Start>Programs>ZebraNet Utilities>ZebraNet Alert.
Warning • A password is required. If you forget to enter the password, the alerts
you just set are deleted.
Note • The SMTP Server address might be referred to as Mail Server address.