Technical information

130 ZebraNet 10/100 Print Server User and Reference Guide
Frequently Asked Questions
FAQs
What if a print job makes it to
the queue, but never leaves the
queue? The label does not print.
These are the things to check:
Confirm that the printer is turned on and
receiving power.
Confirm that the network cable is plugged
in and that you can ping the printer.
If the above bullets do not change the
outcome, it is likely that there was a
misconfiguration while creating the queue.
The queue must be recreated verifying the
following:
Confirm that you use the print server’s
valid IP address.
If you are using a UNIX or AS/400
host, there is an option for the remote
queue name. There is only one valid
response to use: PORTLF1.
If Windows does not have LPR
installed, the above required option
should be left blank.
See the documentation for other oper-
ating system specific queue creation.
What are the minimum
requirements to network a
printer?
Cat-5 network cable with 10BaseT
connectors
10⁄100 PS
Hub or Switch
If a hub or switch is NOT used, you need a
cross-over cable.
Workstation running a TCP stack with print
services installed
What is the default User ID and
password for the print server?
The User ID is admin and the password is
1234.
4XHVWLRQ $QVZHU