Technical information

128 ZebraNet 10/100 Print Server User and Reference Guide
Frequently Asked Questions
FAQs
)$4V
This table provides frequently asked questions (FAQs) on 10⁄100 PS:
4XHVWLRQ $QVZHU
Are there any differences in
functionality between a ZebraNet
10⁄100 PS with an EPL-based
printer and with a ZebraLink-
enabled ZPL printer?
Ye s.
In a ZebraLink environment, with either a
Web browser or with the ZebraNet View
Utilities, there are a variety of Web pages
that display a wealth of status information
regarding both the ZebraLink printer and
its ZebraNet 10⁄100 PS. However, when
used with an EPL printer, such as the LP/
TLP 2844, the Web pages for printer status
are not available at this time, only the Web
pages showing status of the 10⁄100 PS are
displayed. The 10⁄100 PS can be easily
configured. However, printer configuration
information regarding the EPL printer is
not available via the ZebraNet Utilities.
Error conditions: Using ZebraNet Alert, an
EPL printer can be configured to use
different IP addresses to report the
following Alert status conditions: on-line,
off-line, paper out.
For EPL: only two destinations can be
configured to report error messages
(online, offline, and paper out) using
SMTP email alert – serial and parallel port
destinations are not supported.