Technical information

ZebraNet Utilities
ZebraNet Alert
ZebraNet 10/100 Print Server User and Reference Guide 113
4 For PrintServer SNMP Traps, select the SNMP Traps tab.
5 Enter the trap destination and options.
This tells the 10⁄100 PS what TCP/IP address to send the alerts to, and under what
circumstances to send error and log reports. Entering 255.255.255.255 broadcasts
the message to every host on the network with an SNMP program running.
6 For ZebraNet Alert to get and display the messages, you need to open ZebraNet
Alert. To do this, follow these steps:
• From the task bar, select Start>Programs>ZebraNet Utilities>ZebraNet Alert.
 In the ZebraNet Alert dialog, from menu bar, select View>Filter Settings.
 From the View Filter - Devices tab, choose your settings accordingly.
 The View Filter - Events tab allows you to select individual events you want the
program to be aware of.
!
Important • The SNMP trap settings must be established to communicate with
10⁄100 PS if messages are sent to the ZebraNet Alert.
Note • If you select No device filtering, messages from every printer are caught;
Device Address allows you to specify which IP address data will come from.
!
Important • Now 10⁄100 PS’s SNMP Alert messages can be set up in WebView.
From the printer’s home page, activate the link to Alert Setup. You can add
messages that are sent to the ZebraNet Alert for Windows by choosing SNMP as a
destination.