User guide

Configuration
Control Panel Parameters
96
11342L-003 Rev. A 105SL User Guide 7/10/07
Print Sensor Profile
A sensor profile shows sensor settings compared to actual sensor readings.
This label (which will extend across several actual labels or tags) can be
used to troubleshoot printing problems. To interpret the results of the
sensor profile, see Sensor Profile on page 144.
Figure 20 • Sensor Profile
To print a sensor profile:
1. Press PLUS (+) to start this standard calibration procedure and print a
media sensor profile.
2. If the sensitivity of the sensors must be adjusted, perform Calibrate
Media and Ribbon Sensor Sensitivity on page 97.
Table 10 • Printer Parameters (Page 9 of 19)
Parameter
Action/Explanation
SENSOR PROFILE
PRINT